Home

KRB5_CONFIG

krb5-config is particularly useful for compiling against a Kerberos installation that was installed in a non-standard location. For example, a Kerberos installation that is installed in /opt/krb5/ but uses libraries in /usr/local/lib/ for text localization would produce the following output: shell% krb5-config --libs krb5 -L/opt/krb5/lib -Wl,-rpath. 4.1.1.2 krb5.conf. The krb5.conf file contains Kerberos configuration information, including the locations of KDCs and admin servers for the Kerberos realms of interest, defaults for the current realm and for Kerberos applications, and mappings of hostnames onto Kerberos realms. Normally, you should install your krb5.conf file in the directory /etc Package: krb5-config (2.6+nmu1) Configuration files for Kerberos Version 5 This package provides /etc/krb5.conf and any other files needed to configure Kerberos Version 5. This package may be used with one of the implementations of Kerberos in Debian, or with a locally built Kerberos krb5_server, krb5_backup_server (string) Specifies the comma-separated list of IP addresses or hostnames of the Kerberos servers to which SSSD should connect, in the order of preference. For more information on failover and server redundancy, see the FAILOVER section You may point to krb5.conf in your location by passing parameter -Djava.security.krb5.conf=/home/user/keytab/krb5.conf There are many ways to pass that JVM property, for example by defining HADOOP_OPTS

krb5-config — MIT Kerberos Documentatio

  1. You can place the file can anywhere as long as you set the value of the KRB5_CONFIG environment variable to the fully qualified path. For the Kerberos configuration file at the Policy Server, set th
  2. Configure realms under krb5.conf file for using AD Authentication for RHEL VMs Latest response 2018-06-13T16:55:19+00:00 I'm using the following document from Red Hat for help
  3. Server. Now execute the below command to setup realm. # krb5_newrealm It will ask to enter a password for database creation and after that, it will start Kerberos KDC krb5kdc and Kerberos ad
  4. krb5-config. gives information on how to link programs against libraries krb5kdc. is the Kerberos 5 server krb5-send-pr. sends a problem report (PR) to a central support site ksu. is the super user program using Kerberos protocol
  5. krb5.conf file contains Kerberos configuration information, including the locations of KDCs. Make sure that your organization's KDC address is configured here. Normally, you should install your.
  6. The Kerberos configuration properties, krb5.ini or krb5.conf files, must be configured on every WebSphere Application Server instance in a cell in order to use the Simple and Protected GSS-API Negotiation Mechanism (SPNEGO) trust association interceptor (TAI) for WebSphere Application Server

krb5.conf - Kerberos V5 Installation Guid

  1. krb5-config is particularly useful for compiling against a Kerberos installation that was installed in a non-standard location. For example, a Kerberos installation that is installed in /opt/krb5/ but uses libraries in /usr/local/lib/ for text localization would produce the following output: shell.
  2. krb5-config krb5-clients krb5-user. The Kerberos client setup is pretty straightforward using the krb5-config package's config. If you're having trouble, check the following: ensure krb5.conf is set properly. Things to check for: ensure your domain is mapped in the domain_realm section at the bottom; this is used by the GSSAPI LDAP.
  3. krb5.conf contains configuration information needed by the Kerberos V5 library. This includes information describing the default Kerberos realm, and the location of the Kerberos key distribution centers for known realms. The krb5.conf file uses an INI-style format
  4. Kerberos. Kerberos is a network authentication system based on the principal of a trusted third party. The other two parties being the user and the service the user wishes to authenticate to. Not all services and applications can use Kerberos, but for those that can, it brings the network environment one step closer to being Single Sign On (SSO)
  5. The location of the krb5.conf file is different for different versions and deployments of vRO, so the below list shows the locations of the krb5.conf file for vRO 7 vs vRO 8 and standalone deployments vs embedded with vRA deployments. In vRO 7.x standalone, the krb5.conf file is located in /usr/java/jre-vmware/lib/security/krb5.con

Debian -- Details of package krb5-config in si

sssd-krb5(5): config file for SSSD - Linux man pag

Download config(krb5) packages for Mageia, OpenMandriva, openSUS krb5-config(1) Name krb5-config - link against the installed Kerberos libraries Synopsis krb5-config [--all | --cflags | --exec-prefix | --help | --libs library | --prefix | --vendor | --version] Description. krb5-config identifies and displays the special flags that are needed to compile and link programs against the installed Kerberos libraries. Option krb5-config(1) Name. krb5-config - link against the installed Kerberos libraries. Synopsis krb5-config [--all | --cflags | --exec-prefix | --help | --libs library | --prefix | --vendor | --version] Description. krb5-config identifies and displays the special flags that are needed to compile and link programs against the installed Kerberos libraries. Option A krb5.conf file must exist in the /etc directory on each UNIX, Linux or Macintosh node that is running Kerberos. We provide a template for this file as web pages for different operating system which can be found at

The man pages of these configuration files have full details about the file formats. Create the database using the kdb5_util utility. [root@server ~]# kdb5_util create - * If you have Weblogic Server installed on a Windows machines, create a file named krb5.ini / On Unix machines, the file is called krb5.conf instead of krb5.ini. * See the following default Kerberos configuration files and their locations: [Windows] The default location is c:\winnt\krb5.ini Active Directory (AD) is a directory service that Microsoft developed for Windows domain networks. This article describes how to integrate an Arch Linux system with an existing Windows domain network using Samba . Before continuing, you must have an existing Active Directory domain, and have a user with the appropriate rights within the domain.

Kerberos still using default /etc/krb5

I do not have access to change the file in /etc/krb5.conf so as a work around I am setting KRB5_CONFIG. export KRB5_CONFIG=/home/user/keytab/krb5.conf echo-ing this. Windows krb5.ini Configuration. Windows uses the same exact file format as does *NIX platforms (meaning syntax) except the name of the file is different and the file paths inside are Windows file paths. Other than this you can use the same information above for configuring Windows Kerberos client settings Alternatively, you can obtain the /etc/krb5.conf configuration file on the machine that is hosting the Impala server and then complete the following steps: Rename the configuration file from krb5.conf to krb5.ini. Copy the krb5.ini file to the C:\ProgramData\MIT\Kerberos5 directory, and overwrite the empty sample file sudo apt install krb5-kdc krb5-admin-server krb5-config -y During the installation, you will be asked about the Kerberos Realm, the Kerberos server of the Realm, and the Admin server. By default, the Kerberos will use the Kerberos server domain name as a REALM, ' AHMAD.IO ' The complete documentation for krb5.conf is hosted by the MIT Kerberos Project. If you are using a different implementation of the Kerberos protocol, you will need to adapt the configuration to your environment. Kerberos principals and keytab files#. The Trino coordinator needs a Kerberos principal, as do users who are going to connect to the Trino coordinator

How Do I Access Presto in a Cluster with Kerberos

从上述代码来看,先获取Config类引用,然后getInstanceMethod是获得getInstance方法,再次getDefaultRealmMethod是获得getDefaultRealm方法。 因此,假设我们是使用的Oracle的JDK,那么最后是调用的sun.security.krb5.getDefaultRealm() Problem 1 - krb5-config: command not found. setup.py for gssapi uses the krb5-config command to find the GSSAPI library to link against (see here).Because my system was installed using Heimdal instead of MIT Kerberos, the executable command has been renamed to krb5-config.mit so setup.py misses it. $ krb5-config --libs gssapi # doesn't work bash: krb5-config: command not foun Samba, Winbind 패키지 설치. : Ubuntu 12.04 버전 이하의 경우 likewise-open 이라는 패키지를 사용해도 되는거 같네요. # apt-get install samba krb5-config krb5-user winbind libpam-winbind libnss-winbind. : Kerberos 인증 설정을 위한 메세지가 표시가되면 아래와 같이 입력 해줍니다. 1. AD 도메인.

Configure a Kerberos Configuration Fil

Client configuration. Edit the client's /etc/krb5.conf to match your server's configuration. You can copy this file from the server, or just set the required realm information. Testing. You should now be able to get a Kerberos ticket on the client: $ kinit Password for myuser@EXAMPLE.COM: *** $ klis # kadmin.local Authenticating as principal root/admin@UK.ORACLE.COM with password. > kadmin.local: addprinc host/ukp9174.uk.oracle.com WARNING: no policy specified. krb5-config_2.6_all.deb. If you are running Ubuntu, it is strongly suggested to use a package manager like aptitude or synaptic to download and install packages, instead of doing so manually via this website. You should be able to use any of the listed mirrors by adding a line to your /etc/apt/sources.list like this SPN is indeed what makes or breaks kerberos. The caveat is that the CLIENT (browser) decides what the SPN will be, Service-provider server and domain must respect that. In my case, I got burned because I run the service on nonstandard port while in development, so I tried to register SPN as HTTP/[hostname]:6000

Configure realms under krb5

Objective. To configure Apache to use Kerberos authentication. Background. Kerberos is an authentication protocol that supports the concept of Single Sign-On (SSO). Having authenticated once at the start of a session, users can access network services throughout a Kerberos realm without authenticating again Configuration files for Kerberos Version 5. This package provides /etc/krb5.conf and any other files needed to configure Kerberos Version 5. This package may be used with one of the implementations of Kerberos in Debian, or with a locally built Kerberos. Generally this package will be installed as part of installing some Kerberos implementation

Learn Linux Configuration - How to install Kerberos KDC Server and Client on Ubuntu 18

krb5-config tells the application programmer what special flags to use to compile and link programs against the installed Kerberos libraries. Options--help. print usage message. This is the default. --all. prints version, vendor, prefix and exec-prefix. --version prints the version of the installed Kerberos implementation Download krb5-config. Download for all available architectures; Architecture Package Size Installed Size Files; all: 21.1 kB: 62.0 kB [list of files] This page is also available in the following languages: Български (Bəlgarski) Deutsch suomi français magyar 日本語 (Nihongo) Nederlands polski Русский (Russkij. Download krb5-config. Download for all available architectures; Architecture Package Size Installed Size Files; all: 22.0 kB: 62.0 kB [list of files] This page is also available in the following languages: Български (Bəlgarski) Deutsch suomi français magyar 日本語 (Nihongo) Nederlands polski Русский (Russkij. The complete documentation for krb5.conf is hosted by the MIT Kerberos Project. If you are using a different implementation of the Kerberos protocol, you will need to adapt the configuration to your environment. Kerberos principals and keytab files#. Each user, who connects to the Trino coordinator, needs a Kerberos principal

Video: MIT Kerberos V5-1.19.2 - Linux From Scratc

As an alternative to editing the krb5.conf directly, the below information can typically also be entered via any Kerberos-configuring user interface your vendor may provide. If you do not have root privileges on the client machine, you can instruct MIT Kerberos to look at a different file by setting the KRB5_CONFIG environment variable Kerberos is a network authentication protocol. By using secret-key cryptography, Kerberos is designed to provide strong authentication for client applications and server applications. In Pulsar, you can use Kerberos with SASL as a choice for authentication. And Pulsar uses the Java Authentication and Authorization Service (JAAS) for SASL configuration Important to note: Since the krb5.ini file is a java configuration file (not SAP configuration file) the ultimate responsibility for correct configuration falls on the customer or in consulting not support SAP support will attempt to provide best effort support for customers requiring the krb5.ini to integrate with Microsoft Active Director

Setup kerberos client. yum -y install krb5-workstation. Transfer your /etc/krb5.conf (which got created from above command) from the KDC server to the client. Hop onto the client server, install the Kerberos client package and add some host principals: [root@client ~]# yum install krb5-workstation [root@client ~]# kadmin -p root/admin kadmin. python-krb5 0.2 pip install python-krb5 Copy PIP instructions. Latest version. Released: Feb 25, 2009 Kerberos 5 Bindings for Python. Navigation. Project description Release history Download files Statistics. View statistics for this project via. Krb5-config Download for Linux (deb) Debian Sid. Debian Main amd64 Official. krb5-config_2.6+nmu1_all.deb. Configuration files for Kerberos Version 5. Debian Main arm64 Official. krb5-config_2.6+nmu1_all.deb. Configuration files for Kerberos Version 5. Debian 11 (Bullseye - My domain setup was not resolving correctly, when this is done, - Ensure to include the realm with the principal you are logging in as And remember to set the default realm also in the krb5.config file. Concept: Authentication Services relies on DNS (Domain Naming Service) to locate the Key Distributions Center (KDC) which in AD is a domain controller, so if your DNS is not properly.

Setting up Samba as an Active Directory Domain Controller

CentOS Linux + Kerberos Configuration. References: MIT Kerberos. The following RPM's will need to be loaded: krb5-libs. pam_krb5. krb5-workstation (optional for using commands like kinit, klist, kdestroy, kpasswd) The /etc/krb5.conf should look something like this depending on your Domain/Realm: [libdefaults] dns_lookup_realm = false ticket. 四、总结. 其实,基于kerberos连接Hive只需要改动初始化连接部分就可以,需要准备:. 设置 principal 和相对应的 keytab. 指定 java.security.krb5.conf 配置. 指定 hadoop.security.authentication 为 kerberos 认证. 其它代码还是 外甥打灯笼 -- 照旧 。. 更多的基于kerberos的hive操作,已经. 设置krb5.conf和core-site.xml、hdfs-site.xml相关大数据平台的配置文件,用来初始化相关配置信息。使用krb5.conf登陆没有问题,不管设置多个kdc server还是单个,jdk中的相关模块都会解析出来,jdk源码位置为openjdk\jdk\src\share\classes\sun\security\krb5,其中openjdk的.

Make sure to start the sssd service: sudo systemctl start sssd.service. Note. sssd will use START_TLS by default for authentication requests against the LDAP server (the auth_provider ), but not for the id_provider. If you want to also enable START_TLS for the id_provider, specify ldap_id_use_start_tls = true Provided by: heimdal-docs_1.6~git20131207+dfsg-1ubuntu1_all NAME krb5.conf — configuration file for Kerberos 5 SYNOPSIS #include <krb5.h> DESCRIPTION The krb5.conf file specifies several configuration parameters for the Kerberos 5 library, as well as for some programs. The file consists of one or more sections, containing a number of bindings Kerberos Configuration Files. The Fermilab Kerberos configuration file is available in four formats, for SL7 (MIT Kerberos), for CentOS 8 (MIT Kerberos), for Macintosh OS X (Heimdal Kerberos) and for Kerberos for Windows. These text files can be downloaded from the individual links below. The current version of the krb5.conf configuration file.

Kafka Security: Configuring

Linux configuration: Understanding *.d directories in /etc. Learn how your system organizes configuration files and how this organization scheme can help you administer your system. Configuration files, which include other files, are not new. Placing those included files in sub-directories has also been an option since the beginning Navigate to the Tomcat Configuration utility, and click the Java tab. Add the following lines to the tomcat java options: -Djava.security.auth..config=c:\windows\bsc.conf-Djava.security.krb5.conf=c:\windows\krb5.ini ; Restart Tomcat to load the files into memory config_rpcsec_gss_krb5=y such that the RPCSEC_GSS protocol can be used to protect NFS transactions. Without this configuration option enabled, the implementations of the Network File System (NFS) in the Linux kernel remain completely unprotected and are therefore only suitable for use on physically secure and firewalled LANs between computers with mutually trusting root users Step 3: Configure Alfresco Share. The Java files need to be updated with details of the Kerberos configuration and the share-config-custom.xml file edited to enable SSO using Kerberos.. Configure or create the Java configuration file java..config located in /java/conf/security.The following is an example of a java..config file. . The important properties to set are keyTab and.

Package: krb5-config Version: 1.16 Followup-For: Bug #445063 I just installed krb5-config from scratch on a stock Debian machine. My domain name is mit.edu, which should have been mapped to ATHENA.MIT.EDU but was instead mapped to MIT.EDU sun.security.krb5.Config is called against the method getDefaultRealm () to get default Kerberos realm. It was proposed to remove the call by Oracle: new javax.security.auth.kerberos.KerberosPrincipal ( dummy ).toString ().split ( @ ) [1] Attachments. Options subprocess.CalledProcessError: Command 'krb5-config --libs gssapi' returned non-zero exit status 127. 解决办法:. Shell. eric@eric-virtual-machine:~$ sudo apt-get -y install gcc libkrb5-dev. 1. eric@eric-virtual-machine:~$ sudo apt-get -y install gcc libkrb5-dev

krb5-config is particularly useful for compiling against a Kerberos installation that was installed in a non-standard location. For example, a Kerberos installation that is installed in /opt/krb5/ but uses libraries in /usr/local/lib/ for text localization would produce the following output: shell% krb5-config --libs krb5 -L/opt/krb5/lib -Wl. krb5.config.update. This configuration parameter specifies, in hours, how frequently the agent updates the Kerberos configuration file.. In most cases, you set this configuration parameter using group policy. You can, however, set it manually in the configuration file if you are not using group policy or want to temporarily override group policy Generate Kerberos client configuration files using the config.krb5 as following. Here we choose to have the realm name the same name as the domain. But notice that the realm name MUST be UPPER CASE! Generally speaking, the kdc is on the active directory server, but that is not mandatory How to configure kerberos and SSH¶. This section describes how to configure kerberos. Configure Kerberos¶. Next you need to configure Kerberos so we are able to find the PDC domain.. The configuration file for kerberos on linux and OSX that you need to edit is /etc/krb5.conf as root. If you are not able to become root on your machines you can create a file in your home directory called for. Configuration File Description <sidadm home>/etc/krb5_hdb.conf: Configuration of the Kerberos realm to be used with the SAP HANA server installed under <sidadm> <sidadm home>/etc/krb5_hdb.keytab: List of service keys required to authenticate the services on the Kerberos serve

We then use this Secret to mount the file into the default location, as specified in the krb5.conf configuration. Refreshing the Token. Given a container with appropriate Kerberos configuration, and a valid keytab file, it is now possible to construct a simple method of periodically refreshing the Kerberos token 服务端错误记录: 1、服务端在创建数据库的时候报如下错误: 错误提示:kdb5_util: Improper format of Kerberos configuration file while Compiling the code should automatically pick up the proper paths for the KRB5 headers and locations. If further customisation is needed, the following environment variables can be set when building the wheel: KRB5_KRB5CONFIG. The path to krb5-config to use for detecting the Kerberos library to link to; The compiler and linker args are derived from what this function output krb5-appl. mirror of MIT krb5-appl repository. C 2 6 0 1 Updated on Mar 7, 2013. krb5-test. historical test repository for git migration. C 0 5 0 0 Updated on May 11, 2012. View all repositories

1、krb5.conf 默认情况下,kinit使用的是/etc/krb5.conf文件 如何使用特定的krb5.conf文件呢,可以通过设置环境变量KRB5_CONFIG: export KRB5_ Clients and basic configuration. For a basic Kerberos install on Debian or Ubuntu, run: aptitude install krb5-user. This will install the basic kinit, klist, kdestroy, and kpasswd clients. It will also automatically install a Kerberos configuration. When prompted for your local realm, enter stanford.edu (without the quotes) in all lowercase Configuration guide for the older module 4.x can be found here. Before starting configuring the module make sure your Kerberos enviroment is properly configured (i.e. KDC, /etc/krb5.conf, etc.). The easiest way to check is using the kinit command from the apache machine to get a ticket for some known principal (preferably that one who will be used to test the module) There are two important concepts for users: authentication, and accounts. With Active Directory authentication uses the Kerberos 5 protocol, and account information uses LDAP. Therefore we need to configure Kerberos 5 and LDAP on Ubuntu in order to manage users in an Active Directory I have a simple Java program to authenticate to a Windows Active Directory using Kerberos. The following java code works fine without any problems and prints true-. public class KerberosAuthenticator { public static void main (String [] args) { String jaasConfigFilePath = /myDir/jaas.conf; System.setProperty (java.security.auth..config.

The Kerberos configuration file - IB

Find the latest version tag for krb5-conf using select query and then run the following command. Suppose if you found that the latest version tag for krb5-conf was version1490320959000 (sothat you choose the latest version) in the DB then try setting it selected = 0 / 1 accordingly. 2. Restart ambari -server. Configuration of Kerberos with Elytron in WildFly 02 Jan 2018. This tutorial describes how to configure Kerberos authentication in WildFly using Elytron. Kerberos server. For needs of this tutorial we will suppose you have Kerberos server already running and generated keytab files for services Step 1: Install the krb5-libs and krb5-workstation packages on the client machine. Step 2: Copy the /etc/krb5.conf from the KDC server to the client machine. Step 3: Now we need to create the principal for the client in the KDC/Kerberos database. You can use the below commands to create the principal for the client machine on the KDC master server krb5_set_config_files() set the list of configuration files to use and re-initialize the configuration from the files. krb5_prepend_config_files() parse the filelist and prepend the result to the already existing list pq The result is returned in ret_pp and should be freed with krb5_free_config_files(). krb5_prepend_config.

centos7配置kerberos服务,并使用JAAS登录. 准备两个虚拟机:192.168.1.101、192.168.1.102,101作为kerberos的server端,102作为kerberos的client端。. 开启88端口。 1、环境准备 1、java version 1.8.0_131 2、zookeeper-3.4.12 3、kafka-2.12-2.3.1 4、基于本人的另外两篇博客已安装kerberos与Zookeeper kafka的安装建议通过百度一下相关教程很多,本文就不在论述。2、kafkaServer端开启kerberos 2.1 添加认证主体 [root@henghe-01 data] kadmin.local kadmin.local>addprinc -randkey kafka/hengh

Ubuntu Desktop Dominio - Configura Ubuntu, Proxmox, Zabbix

The configuration file (krb5.conf) location is changed by altering the static defaultKRB5_CONFIG variable. This is used in native JNI code to set the KRB5_CONFIG environment variable. The credentials cache location is set in the onCreate() method, specifically with the nativeSetKRB5CCNAME() method Provided by: sssd-krb5_1.11.5-1ubuntu3_amd64 NAME sssd-krb5 - the configuration file for SSSD DESCRIPTION This manual page describes the configuration of the Kerberos 5 authentication backend for sssd(8). For a detailed syntax reference, please refer to the FILE FORMAT section of the sssd.conf(5) manual page. The Kerberos 5 authentication backend contains auth and chpass providers install_config.conf这个配置文件比较繁琐,这个文件主要有两个地方会用到. 1.DS集群的自动安装. 调用install.sh脚本会自动加载该文件中的配置.并根据该文件中的内容自动配置上述的配置文件中的内容. 比如:dolphinscheduler-daemon.sh、datasource.properties、zookeeper.properties、common. This page is also available in the following languages (How to set the default document language) SFTP reader issue - No Configuration was registered that can handle the configuration named com.sun.security.jgss.krb5.initiate. 30 days ago 30 July 2021. 4 replies; 118 views A Userlevel 2 +3. avenash Sidekick (Employee) 8 replies.

问题描述:java连接hbase通过kerberos认证过程中,出现异常java.lang.IllegalArgumentException: Can't get Kerberos realm,具体异常的原因为Caused by: KrbException: Cannot locate default realm解决过程:项目环境:使用的是jdk1.8,hadoop-commo.. This reference documentations contains following parts. Part I, Introduction introduction to this reference documentation Part II, Spring and Spring Security Kerberos describes the usage of Spring Security Kerberos Part III, Spring Security Kerberos Samples describes the usage of Spring Security Kerberos Samples Part IV, Appendices generic support materia HOW CONFIGURATION CHANGES ARE APPLIED. The Samba suite includes a number of different programs. Some of them operate in a client mode, others are server daemons that provide various services to its clients. The smb.conf file is processed in the following way

MinIO supports two kerberos authentication methods, keytab and ccache. To enable kerberos authentication, you need to set hadoop.security.authentication=kerberos in the HDFS config file. MinIO will load krb5.conf from environment variable KRB5_CONFIG or default location /etc/krb5.conf. or MinIO will use the default location /tmp/krb5cc_% {uid} In this article. Azure Data Studio supports connecting to SQL Server by using Kerberos. To use integrated authentication (Windows Authentication) on macOS or Linux, you need to set up a Kerberos ticket that links your current user to a Windows domain account.. Prerequisites. To get started, you need: Access to a Windows domain-joined machine to query your Kerberos domain controller Introduction. The following is a distribution-specific list of commands to install Samba. Note, that the list of commands is neither provided nor actively verified by the Samba team. If you see any missing packages or incorrect package names, please update the command or send the information to the Samba mailing list.. Red Hat Enterprise Linux / CentOS / Scientific Linu Save the changes and exit the file editor. Run the kubectl -n prelude get pods command. Wait until all pods are running. Verify that the Kerberos debug logging is enabled. kubectl -n prelude log {vco_app_name} -c vco-server-app | grep krb5. Verify that the logs contain a similar message. kubectl -n prelude log vco-app-5c965f9b9d-v8srd -c vco. If above doesn't work then the further configuration is required as mentioned below. Realm and KDC Info. Create a configuration file krb5.conf, krb5.conf should contain the realm info and hostname of the KDC. Save the krb5.conf in a directory which can be accessed by the application (Let's say: C:/kerberos)

MicrosoftTouchHow to install Kerberos KDC Server and Client on Ubuntu 18Cannot find KDC for realm while getting initial